heaging-banner

Pools and Hot Tubs

Swimming pools and hot tubs use a great deal of energy, resulting in higher electric bills. Pool pumps, for example, can use more energy and cost more to run than all your home appliances combined.

Connexus Energy suggests these energy-saving practices for home hot tubs and swimming pools.

Hot tubs

  • Set the hot tub thermostat between 100°F and 102°F, as recommended by the U.S. Consumer Product Safety Commission. Most hot tubs have a factory setting of 104°F.

  • Create a windbreak with privacy panels, shrubs, or fencing to prevent the wind from cooling your water.

  • A floating thermal blanket will help retain heat and reduce the amount of moisture buildup on the inside of your hard cover, extending its life.
  • Use a well-insulated hard foam cover. Make sure the cover and tub lip fit snugly.
  • Keep the cover in good condition. Most heat loss occurs through the spa cover. Replace the cover if the interior foam breaks or becomes saturated.
  • Change the water in your hot tub every 3-4 months. At this time, flush the plumbing system and clean or replace the filter to maintain appropriate water circulation and reduce the strain on the pump motor.

Swimming Pools

  • Set the pool thermostat to 78°F. Raising the temperature by even one degree Fahrenheit can increase energy costs an additional 10 to 30 percent.
  • Use of a solar cover can add up to 10°F, and helps lessen the time your pool heater runs.
  • Follow the manufacturer-recommended circulation times. Generally, eight hours a day is sufficient. Adjust as necessary.
  • A variable speed pump will provide the most energy efficiency.
  • Save even more with a variable speed pool pump rebate.

Residential Variable Speed Pool Pump Rebate Application

  • Rebate amount is $100 per qualifying Variable Speed Pool Pump (VSPP).
  • Limit one rebate per member account.
  • Multi-speed pumps do NOT qualify.

How to apply for a rebate

 

  1. Applications must be submitted by December 31, 2025. 
  2. Fill out this form completely, sign, and date it. Incomplete forms cannot be processed. 
  3. Attach itemized invoice/receipt and specification sheets for the project. 
  4. Complete the online form below, mail or fax completed rebate form and supporting documents to Connexus Energy. Fax 763.323.2603, or Mail 14601 Ramsey Blvd., Ramsey, MN 55303.
  5. Rebates will be applied to your Connexus Energy bill upon verification of installation, unless specified otherwise.
  6. Please allow 6-8 weeks for processing. 
  7. Rebates available under the Connexus Energy rebate program are offered on a first-come, first-served basis, and are subject to the project or member eligibility, and the availability of funds.
  8. Installations are subject to MN TRM minimum baseline efficiency ratings, as applicable.

your most powerful membership®

These four words focus on the most important component of our cooperative: our members. In a cooperative, everything we do is for the benefit of our membership. This vision provides daily inspiration to build powerful partnerships with our members.

contact-bg

Contact Connexus Energy

Get in touch with Connexus Energy. Call, email, stop in, or fill a form with your questions and feedback.